“De-greasing” Saran Doll Hair

For those of you who may not have been aware like I was, saran doll hair usually has this slight filmy feeling to it, or as others have said it is “greasy” or “oily”. It truly is oily and has the unfortunate side effect of making your doll look like she has nappy no-shower in a week hair if you don’t wash it properly. You can see in the picture above that the doll hair on the left has this oily problem, whereas my freshly washed sample piece on the right does not. I spent quite some time google searching methods to degrease hair with no luck, so finally I just started experimenting with things until thank heavens I found something that works!

So here’s what you need to do to get that greasy, oily feeling out of your saran hair…..wash it with a dish soap that has a degreaser in it. It’s as simple as that. Most dish soaps on the market have some sort of degreaser in it, for me, we had Palmolive in the house so I just used that, but I’m sure any other quality dish soap on the market will work. After I gently washed the fibers in the dish soap I made certain to rinse the hair thoroughly, because obviously you don’t want to leave soap film in the hair. Here’s my tip though, don’t blow dry the hair afterwards. I found that with my test sample of washed hair that blow drying the hair caused it to get a static build-up with flyaway hairs. Letting the hair naturally air dry solves this problem, however it will take all day. 🙁 I even set my dolls head out in our 103 degree summer heat outside and it took her hair all the way until the evening to be mostly dry!

Well, that’s it for now, hopefully if you were struggling with this problem I was able to help you out! Look for more progress on my custom Draculaura soon now that I’ve “de-greased” her hair, lol.

Monster High Re-root Progress

So the above pic is a series of progression shots through my reroot. I’m not going to go into an in-depth reroot tutorial because I already posted a list to reroot tutorials in a previous post here. Basically I started in the back using the reroot tool and filled up each hole. I saved the bangs until the end so it would be easier to keep them separate from the rest of the hair. Also, naturally you save the part thatching for the very last. Part thatching is probably the hardest part of a reroot, but there is also a great tutorial for that in the post I previously mentioned. 🙂 So, after you get all the hair in, you need to smooth it down how you like and set it with boiling water. You can also use steam to set the hair as you work on your part thatch, which helps to discover any weak areas that may need more hair.

So, if your hair is already washed and the hair is exactly as you want it, you can wrap the head gently in saran wrap and pour boiling water over the head. You can see the before and after in the shots above. Keep in mind this technique is for SARAN FIBER!! Saran fiber has different temperature requirements from nylon or kanekalon. Saran can easily handle boiling water and in fact you pretty much need the heat of the boiling water to style it.

Anyway because I didn’t wash my saran fiber before rerooting the doll I decided I should go ahead and pour the boiling water directly on the fiber so it not only removes the film that is often on saran, but also sets the hair as well. One thing to keep in mind when pouring boiling water on unsecured hair though is you must be gentle and slow otherwise you could get some hairs out of place and that would be no good. In the future I plan to wash my saran so I can use the previous saran wrap method. Another thing you want to keep in mind is you shouldn’t expose the plastics to boiling water for too long. 20 seconds or so should suffice without worry of melting any fibers or causing frizzing.

I also found this nice little tutorial site for styling doll hair which helped me suss out some of these methods for setting the hair. I will leave you with that link here: http://www.dolls-n-daggers.com/Dolls/OOAKtipshair.php These tutorials also cover cutting dolly hair as well as how to style hair to be curly. Lots of great info!

Monster High Custom – Just Beginning


After my dollyhair order came in I wanted to get started on my custom Draculaura right away while I am still feeling all excited about the new hair. The first thing you have to do naturally is remove the head. Most tutorials I saw suggested running the head/neck area under water until the head became soft enough that it would allow the anchoring apparatus to be pulled out of it. Personally if I can avoid using water I will, and I found out that it’s quite easy to just take a blow dryer, blow dry the head/neck joint area for 30 seconds or so until hot, and then just pull and yank the head off while it’s still hot from the dryer heat. It took me all of a minute and I didn’t have to get anything wet or wait for hair to dry or anything.

Next step was to cut off all of her hair, lol. Anyway for whatever reason I felt like saving the cut hair, it’s too short to root with, but I imagine it could still be useful for MLP tails or maybe it could even be wefted and used for a Brownie wig, who knows.

After cutting the hair, you then need to take your tweezers and start pulling out what’s left of the hair from the inside of the head. Often times there is glue inside rooted doll heads, and there definitely is in MLP toys, but I was pleasantly surprised to find that there was NO GLUE inside my Draculaura head. You may be wondering then what was holding it all together, and I shall tell you what I suspect. I suspect they use heat to melt the hairs inside the head, but I can’t be positive. At first I thought it was loop rooted, but then I started noticing these tiny bits of melted plastic bits here and there falling out. Either way because there appears to be no glue, once you start breaking apart and pulling out plugs of hair, you can also pull hair from the outside of the head as well, which is helpful because Monster High dolls have small neck holes. Also one more tip is to squish your scalp close to your neck hole so you can easier see the hair and nab it with the tweezers.

After removing all of the hair, it’s time to wipe the face paint off. Customizers will argue up and down on what to use to do this and what not to use and they are often contradictory. Some people swear by Windsor and Newton brush cleaner, while others will tell you acetone, in the end it’s your call what to use. I myself for this particular doll used acetone. Acetone will without a shadow of a doubt remove all the paint from the head no problem, BUT it will take a while because the paint WILL SMEAR so expect to spend a good 15 minutes scrubbing the head. Don’t panic though once you see a smear, because it will come off with a fresh cotton ball and more acetone. Because the paint smears, you will also have to spend time removing the scalp color because there is no way you can remove the face well enough without accidentally hitting the scalp color and smudging it all over the place. My last piece of advice when dealing with acetone is be sure to rinse your doll’s head thoroughly in water afterwards!! Acetone is a solvent used to remove resins aka plastics, so it can destroy your doll if you do not fully rinse and wash all residue off afterwards. It should also go without saying that you should never leave a doll to soak in the stuff, like EVER.

Anyhow, moving along, in the above pic you may notice I have a spot circled on the dolls head and I have out a tube of glue. You see, when they rooted Draculaura’s hair in the factory they put some plugs so close together in her front part that it kinda made a big hole. 🙁 After some research I found that the best thing to do would be to fill the hole with a flexible glue. To be honest there really isn’t that much information that I was able to find out there for patching doll heads. The one site I did find with the most info suggested gel super glue, however just because a super glue says it’s gel doesn’t mean it will dry flexible. I figure that it is necessary for the glue to dry flexible otherwise the glue will just pop out during the reroot process. I have decided to try Loctite’s vinyl and plastic glue that dries flexible. Doll heads are vinyl afterall, so the theory is this should work. Anyway taking a toothpick dipped in glue, I carefully put a few drops in the problematic hole (the area circled). This particular glue dries in 30 minutes, but requires 24 hours to cure, so I plan to leave the doll alone now until sometime tomorrow. I’ll just have to wait and see how well it fares against the reroot tool!

EDIT! – I am happy to report that the Loctite vinyl and plastic glue works fabulously! 😀

Rerooting Tutorials

While I’ve been waiting for my order from Dollyhair to arrive, I’ve been scouring the internet for any tutorials or general information I can find about re-rooting and the different kinds of fibers and such that you can buy. I figure I’d go ahead and make a posting and share what I’ve found so far.

Mohair and Alpaca related

My Monster Crush: This blog seems to focus on Monster High dolls, and this particular posting has information on making doll wigs out of feathers as well as re-rooting with mohair.

Wedge’s Mohair Tutorial: This is a image on flickr…look for the “BIG” link in the description to see the larger image. Anyhow this tutorial is Blythe centric and again focuses on how to reroot with mohair.

Mademoiselle Blythe: This is another Blythe focused blog, but this posting has a TON of information on the differences between mohair and alpaca, as well as an overview of rerooting and TONS of helpful links on where to find mohair and alpaca fibers as well as more tutorial links.

Saran and other fibers

The Manor: This specific posting has a lot of information and pictures to illustrate the differences between Nylon, Saran and Acetate doll hair.

Wide Eyed Girls: This site has one of my favorite nylon/saran reroot tutorials. It has lots of pictures and I think shows the simplest part thatching method for creating part lines n’ that.

Suppi.net: This link will take you to a search result page after searching for “reroot”. Has many different posts with random information on rerooting, BUT it most importantly contains information on good hair color matches for Monster High Draculaura complete with pictures and fiber names.

This is all I have collected so far. Of course Dollyhair, My Little Customs, and Restore Doll each have their own little tutorials section, so it would be a good idea to scour those too if you are looking for more tutorials. Lastly, if you happen to know of any other great rerooting tutorials or fiber information sites please feel free to post the links in the comments!! Any posts containing links though will have to be moderated by me first as a spam prevention, but don’t worry, they will get through!

Monster High Draculaura

SoOOooo, I guess I’m getting on the Monster High customizing bandwagon because I bought my first Draculaura last week. The image to the left is of her straight out of the box, the only thing I did to her was trim her bangs to remove that weird, vampy, widows peak thing she had going, and I also let her hair down out of her ponytail. I think I’m finally starting to solidify how I want to customize her. I am fairly certain I will be re-rooting her hair, whether partial or full, and she is definitely getting her face repainted and her body blushed. Currently I’m waiting for my order of doll hair from dollyhair.com before I make any definite decisions about her hair. On the one hand her pink streaks have a punkish charm, but on the other hand it can kinda be tacky city. XP I’ve got to figure out what to do with her hair first though, because there is no way I’m rerooting after a custom paint only to wreck it with half my sealer coming off during the process, which is what happened during my Rainbow Dash custom project. Speaking of Dashy, I acquired the glue I needed and she’s drying right now. As soon as her glue dries I’ll put together her tail, pop her head back on and start the styling process on her mane.

Getting back to Draculaura now, I did find out that if you want to retain her natural hair and use a wig, then 6-7 is a perfect fit. Here she is trying on one of my MSD girl’s wigs. See, she’s starting to look cuter already! I also bought a Liv wig on clearance at Target to try, but I’ll be saving that for another posting. I’ve also dug up quite a few excellent rerooting tutorials in my quest for knowledge before I attempt what will be my second rerooting project, but my very first dolly one (since Dashy is a pony after all!). Anyhow I shall be trying to share as much info as I can with you as I go through the customizing process. I am very looking forward to another dolly project!!