More Progress on my BJD sculpting project.

So, I’ve got the lips looking more natural now, and I brought down the nose a little and gave it some more shaping. I also started rounding out the cranium in the hopes that I can get wigs to fit better on her since her head shape was a little off. My only concern with rounding out the cranium is that her head is getting a bit larger and I worry that her head may be coming more MSD size and perhaps a bit too large for her body. I won’t really know until I get a chance to lay out the doll again though which won’t happen until after I get the last of my comic work done for the week (probably Sunday night or Monday). Still have a lot to do with this head, but I am still happy with the direction it is taking.

Shot this pic right before I had to clean up my drawing table. I made some joint progress, as you can see the torso joint is coming along and all the joints are in place for the whole left leg. The right leg still needs it’s knee and ankle joint fitted though. The hip joints are giving me grief of course, but I won’t mess with them too much more until I am able to get the legs strung so I can see the balance issues and make corrections. The right knee joint is going to be a bear though because the foam core got twisted so the leg walls are thick in places they shouldn’t be among other problems. XP Just writing about it makes me anxious to be able to get her back out and get to work on those leg joints. I really want to see if she will stand at all, and as soon as I test that it will give me insight into better hip joints.

More Progress on my Artist BJD

So, she has ears now, yay! But one is a tick higher than the other, boooo~. So I’ll have to do some careful sanding and add itty bitty bits of clay here and there to even it out. I tried to work on the shape of her lips a little as well. I’m hoping I was able to refine it just a bit more…I really hope I’m not overworking it! ^^;;; The other thing on my to-do list for the head is to even out the eyes, since one is just a tick lower. I think I might save the eye adjustment for when I have the headcap off, this way I can carve the wells for the eyes and then sculpt with the eyes in place.

The rest of my progress has been in cutting up the different part to prepare them for jointing. I also started work on the balls for the hip joint and have molds done for the ankle and knee joints. Now comes the long tedious work of creating all of the ball joints and then waiting for them to dry so I can tool them and graft them onto their respective body parts.

My next goal is to get the hip joints grafted onto the thighs and get the hip socket properly set to accept the joint. After that I plan to begin work on the torso joint, then probably work on the knee and ankle joints..or perhaps the other way around, ha ha ha.

Artist BJD Progress

I’ve decided to return to my doll project after having been inspired by other artisans great looking dolls. So here is my progress on “Cookie” who is looking less to me like a Cookie the more I work on her, haha. Anyhow since this picture was taken I’ve made her upper lip a little less thin and have been endeavoring to make the lips look a little less pinched/pursed. I think I am on the right track, but I will see after I post this latest bit up for critique in a doll making forum I frequent.

I plan on adding the ears soon and then cutting off the headcap. Once I am able to do that I’ll be able to drill out the eye sockets and start fitting in some eyes and better forming the eye shape. I’m hoping she will take a 14mm or even a unoa size eye since I have plenty of that size lying around.

I also cut the legs at the ankle last night so now I will sculpt the feet and add the ball joint. I noticed too late that I cut the ankle straight through the joint area so I will need to trim off a few millimeters of the ankle. It’s not a critical error, but it is one that will require extra work down the road…sigh.

You may notice in the picture that I accidentally sanded down to my styrofoam core. I ended up making a patch on the inside of the leg so as to keep the outside shape. Styrofoam cores are a bit tricky to work with when you are dealing with a smaller doll as any thin areas of styrofoam are apt to break, which is exactly what happened in both of my ankles. This in turn caused a drifting of the core so they weren’t perfectly centered…thus a thin side. XP

That’s it on my progress for now. I’ll post again when I have any substantial changes.

Momocolor’s Emma

When I was browsing the news posts at BJDcollectasy the other day I noticed the posting for the doll company Momocolor. The face shape of the doll reminded me a little of Pullip, being so big and round, so I decided to read more and holy cow, look at that adorable body for the doll!! She’s a little on the tall side for a yosd range doll at a height of 29cm, but she is really nicely proportioned for a yosd range mature tiny. I’m going to have to keep this one on my “to watch” list. I’m curious to see what other head sculpts the company will come up with and also what the first round of owners of these cuties will think of them. Hopefully it won’t be too long before they have a discussion thread on DoA I can haunt, lol.

In other dolly news, I have now made my first foray into the yosd sized dolly world. Just a couple days ago I purchased a Slinky Neko Borry Pennybrite fullset off a seller on DoA and I am anxiously awaiting her arrival. If I had seen the Momocolor dolls before my purchase they definitely would have been in the running! I looked over so many different yosd sized dolls and there are still many sculpts out there I love, so I can foresee owning more than one yosd eventually. My other favorites were the Bambicrony and Aidolls, but even Luts had some cuties and I still have a soft spot for Dollzone’s big eyed Sis. Argh, so many dollies and not enough money!! XP

Momocolor’s website:

Cookie’s Progress – Face Refining

I’ve made a little more progress on Cookie’s face sculpt. She’s really coming along now, but I still have some tweaking to do. I need to work on symmetry a little more and tweak her nose a bit and then sand and smooth her. I’m pretty happy with how things are going, but I also know that sculpting is the easy part. Creating all of the joints, now that is going to be the hard part!

Tomorrow I am hoping to get some more work done on her head. At this point I’d love to make the headcap cut and hollow out the eye wells and see what she would look like with eyes in, but I will wait until I get everything just so.